Pos                                                                Description

1    Main machine                                                                                             

l 72 sets of heddle belt  + heddle wire, 34 of heddle wires stations in each group, totaling 2448 pcs.

l Adopt rolling reed structure, each reed eye wear a piece of gauze, a total of 2448 reed eye.

l It adopts two inner and outer tension jump bar, with a maximum of 1872 outer jump bars and a maximum of 576 inner jump bars. Use the outer jump bar as the reference and add the number of inner jump bar as needed.

l Main motor use Italy DERILAP three-phase asynchronous motor (11KW)

l With automatic refueling cup, you can set the refueling time and fueling amount on the control screen.

10   Shuttle        

l The shuttle is equipped with an automatic weft yarn tension control device.

l The shuttle is equipped with front and back Block yarn plate, Max.can loading 120mm diameters weft yarn.

l The shuttle arm has a supporting structure.

 2    Creel

l 2 creels total 2592 stations

l Equipped with 2592 hanging hooks

l The creel is designed according to the warp yarn ingot and can be loaded with a spindle with a diameter of 160mm.

Note: Not include Bobbin

1    Fabric winding device

l Center winding, Oil pressure type.

l 3.5NM Motor,torque regulator control.

l We offer a 4.5" roll core (standard size).

Remarks: 4".6" roll core can be selected - need to be customize

1    Bobbin saving                                     

l   There is a platform on each side of the circular loom for placing the bobbin.

1    Electrical configuration                            

►   Lighting device

l Equipment is equipped with 4 sets of 18W LED lighting tubes

►   Heat sink

l Equipped 2 sets cooling fan in Tension frame.

l But the fan interface and switch are reserved in the control cabinet.

►   Let-off system

l A total of 4 feed rollers on both sides of the main machine, ensure that the warp yarns are smoothly fed into the main machine and maintain the real-time tension average.

l Each let-off motor is controlled by load cell + Inverter control let-off motor. Let-off roller control by Let-off motor.

►   Take-up system

l Weft density is set by the circular loom main control system.

l Inverter control the take-up motor.

►   Weft yarn detection

l It is equipped with a photoelectric sensor and a proximity switch to control the weft yarn together and stop automatically when the weft yarn used up.

l It is recommended to use black bobbin for best effect.

Remarks: Please use light colored tube for black yarn!

►  Warp yarn break detection system

l Each warp yarn is length compensated by tension adjuster and automatically stops the machine when yarn breaks.

l The warp yarn breakage has an indicator light, and the six groups of indicator lights are distributed around the equipment.

►   Weft yarn break detection system

l 2 sets of magnetic sensors monitor the weft yarn. In case of broken weft yarn, it will stop the machine automatically.

►   6 sets of button boxes

l There are 6 sets of button boxes around the main machine for easy operation. Each control box have inching button, stop buttons and start buttons; all are Schneider brand.

1    Circular loom control system                                                                                         

Circular loom central computer control system can be used

►  Adjust the weft density

►  Set the length of the Fabric

►  Order order

►   Manually operate the lifting system without turning it on and provide the following device parameter indications:

l 4 file automatic meter

l Run time calculation

l Change roll / cloth roll indication

►   Equipment Evaluation System

The module determines the following additional parameters for each class and evaluates:

l Running time of the device

l The number of warp yarn breaks

l Number of weft yarn breaks

l Frequency of weft yarn use up

l The weft yarn can be precisely adjusted in the open/stop state to optimize the fabric surface effect.

l The above instructions are available in two languages (English/Chinese), with metric or imperial (inch) systems

* according to equipment requirements

We reserve the right to modify the technical parameters due to the continuous improvement of equipment technology.